Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact

DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

Upcoming Events

No upcoming events found

Replacing washing machine bearings on a LG DD WM2301HW and ran into reassembly trouble.

By StunningVictory
February 5, 2020 in DIY Appliance Repair Help

https://appliantology.org/topic/77230-replacing-washing-machine-bearings-on-a-lg-dd-wm2301hw-and-ran-into-reassembly-trouble/

Followers 1

Recommended Posts

StunningVictory

Posted February 5, 2020

Hi everybody,

like the title says I’ve been replacing the bearings on a washing machine I got for free. After many repair videos and much effort I’ve replaced the inner and outer bearing. However the inner tub doesn’t reseat fully into the outer tub. The inner tub spins freely, but it’s leading edge rubs against the rubber seal in the front making an awful squeaking noise. It looks like the inner tub is about a quarter of an inch too far out. Any advice would be appreciated.