Miele W1213 - F53 Fault - Fixing - Brushes ?

[Super90]

The old washer stopped working, had a tech come out ( I was traveling and could not help at the house).   He says the door gasket is leaking and dripping on the float valve.   I ordered a new one and replace it.   All looks good.   Run the washer and get a Code F53.   That's the Tachogenerator.   People say it's usually the brushes in the motor.   I pulled everything apart to look at the brushes and my motor doesn't appear to have the style brushes that I see on line.   : (

 

Here is my motor and brushes...

 

https://photos.app.goo.gl/UWUhbkdi9KNqqJh78

 

https://photos.app.goo.gl/imjhXESzKwYbNtVZ6

 

and here are brushes I see online for a W1213.  Supposedly part number 4297413, but these look totally different

https://i.ebayimg.com/images/g/-b0AAOSwGx1ZztV5/s-l500.jpg

 

I don't really understand how these brushes even come out on my machine....   They almost look like the solid wires are almost soldered in there.

 

Ideas ??

 

TIA

[Super90]

So, I only had the cover off the whole brushes module !   D'oh !

Not sure how to post photos on this forum easily.....

He is the motor with that part off

https://photos.app.goo.gl/pS6Fdv7LmEAU7Vd47

And the brushes module out...

https://photos.app.goo.gl/Z7RLQATN51k552ju6

 

And I cleaned it up with electric contact cleaner so we can see....that the brushes, and especially that one side, are worn out...

https://photos.app.goo.gl/dyJzDH47USckrHeJ6

 

Now to order parts and replace...

[Super90]

And another fellows video of how to replace the brushes...

 

https://www.youtube.com/watch?v=vMsYcWR_Nnk