Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 15 March 2025 02:00 PM Until 03:00 PM
      5  
      All are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is available to everybody, including you! You don't have to be a member of Appliantology to join the fun.
      When: Saturday, March 15 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to register. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it. 

Recommended Posts

Posted
Manufacturer: GE
Type of Appliance: Down-draft gas cooktop with fan in center not rise-up
Model Number: JGP990SEL1SS
Have you validated the model number at an online parts site like Repair Clinic? (yes or no): yes
Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): yes

There is a thread on this mod#. It was said to search JGP* which I did. But there was no manual for this style down-draft gas cooktop. This one is like a J/A with the vent in the middle not a rise-up in the back. It has bad burner switches and is not real obvious how to access them. Burner switches are real expensive so if it is too hard cust. may buy a new one.

 

Thanks Boyd

Posted

Uses this Mini Manual.

 

  • Like 1
Posted

Still no tear down. Diagnosis is easy 2 burners do not click and 2 do. Sorry I did not mention that.

Thanks Boyd

Posted

Yeah they don’t make a service manual for every model.I found this! 

 

  • Like 1
Posted

That looks like it.

Thanks Very Much

Boyd

  • 2 weeks later...
Posted

Did switch job yesterday. The tech sheet was just what I needed. I did cut and splice 2 of the wires because the ends were not real accessible, but that should be no problem.

Thanks very much

Boyd

  • Like 1
×
×
  • Create New...