Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 15 March 2025 02:00 PM Until 03:00 PM
      0  
      All are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is available to everybody, including you! You don't have to be a member of Appliantology to join the fun.
      When: Saturday, March 15 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to register. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it. 

KENMORE WASHING MACHINE 110.C28902790 Schematic Request


Recommended Posts

Posted (edited)
Manufacturer: Kenmore
Type of Appliance: Top Load Washing Machine
Model Number: 110.C28902790
Have you validated the model number at an online parts site like Repair Clinic? (yes or no): YES
Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): YES

Hey Guy's

 

Another schematic needed. Please note on Part Select you find the model number by removing the "C". In other words the model number would be 11028902790

p.s Canadian Model

Edited by Peteralward_
Posted

3950070 is wiring diagram.It does not pull up on servicematters.Found this old thread on site that says.Here is one that should be close enough if there is not one stuck to the back panel: 

 

Posted
2 hours ago, Captain Dunsel said:

3950070 is wiring diagram.It does not pull up on servicematters.Found this old thread on site that says.Here is one that should be close enough if there is not one stuck to the back panel: 

 

Thanks Cap

  • 1 year later...
Posted

Know this is an old thread, was helping a diyer, He posted a picture with document number and was able to find the tech sheet. Did a search to see if the tech sheet was already here on site and found this thread. 

posted pending approval: 

 

  • Like 1
  • Team Samurai
Posted

Thanks, Vance! Approved.

×
×
  • Create New...