allen63 Posted April 6, 2022 Posted April 6, 2022 Manufacturer: Maytag Type of Appliance: Top load washer Model Number: MVWB965HW0 Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): Yes Looking for specific service manual, model number MVWV965HW0. The manuals I found on a appliantology are not the same that are close to it. The issue with the washer is the door lock red light blinks and can’t do anything else. I put a new door lock and it did the same thing. All that’s left is a control board which I will replace. I would like to put it in diagnostic mode afterwards. Or is there anything else to do after replacing the lid lock? Thanks.
Vance R Posted April 6, 2022 Posted April 6, 2022 This is the tech sheet for this model, the label indicates rev c but it is the rev d listed at service matters: To enter diagnostics it is the 1-2-3, 1-2-3, 1-2-3 method.
Vance R Posted April 6, 2022 Posted April 6, 2022 Sorta remember this lid lock uses a reed switch to detect if the lid is down, the lid switch is circuit is j6-1 to j6 -5, easy check on page 20.
Recommended Posts