Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 15 March 2025 02:00 PM Until 03:00 PM
      0  
      All are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is available to everybody, including you! You don't have to be a member of Appliantology to join the fun.
      When: Saturday, March 15 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to register. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it. 

Recommended Posts

Posted
Manufacturer: Wolf
Type of Appliance: Hood
Model Number: CTEIH42I
Have you validated the model number at an online parts site like Repair Clinic? (yes or no): yes
Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): yes

Trying to find service manual for Wolf Hood Series CTEIH42I

Thanks

Posted

I've uploaded the Service Manual and Parts Page pending approval. 

For what it's worth, the only one of these I've run across, issue was unresponsive touchpad; looking closer it was visually obvious without disassembly that the touchpad PCB and display had become detached behind the glass, and wasn't in contact with the touchpad buttons, just had to remount the touchpad PCB, fwiw.

 

  • Like 1
Posted
9 hours ago, Rhubarb Tau said:

I've uploaded the Service Manual and Parts Page pending approval. 

For what it's worth, the only one of these I've run across, issue was unresponsive touchpad; looking closer it was visually obvious without disassembly that the touchpad PCB and display had become detached behind the glass, and wasn't in contact with the touchpad buttons, just had to remount the touchpad PCB, fwiw.

 

Thanks,

In this one the lights are not working, I can hear the relay but there is no voltage going into them.

×
×
  • Create New...