Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 5/10/2025 @10 AM ET
      10 May 2025 02:00 PM Until 03:00 PM
      1  
      All are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is available to everybody, including you! You don't have to be a member of Appliantology to join the fun.
      When: Saturday, May10 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to register. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it. 

Kitchen Aid refrigerator KRSC503EBS01 service manual needed

dufoedavid

By dufoedavid
in Appliance Service Manual Requests Forum

 Share

Recommended Posts

dufoedavid

dufoedavid

Posted
Posted
Manufacturer: Kitchen Aid
Type of Appliance: Refrigerator
Model Number: KRSC503EBS01
Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes
Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): Yes

Thank you.

  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

  • dfphoto

    1

  • Captain Dunsel

    1

  • dufoedavid

    1

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Captain Dunsel
Captain Dunsel

Uses the same one tech sheet as this one model:  

Captain Dunsel Sensei

Captain Dunsel

Posted
Posted

Uses the same one tech sheet as this one model:

 

  • Like 1
  • 2 years later...
dfphoto Sensei

dfphoto

Posted
Posted

Hello, I finally was able to get the CX to let me try a rebuilt control board but after 2 days the beeps came back... I'm still lost on this... 1 thing I noticed is the LED in the freezer (side) is Dead it was flickering but now dead... I was really confident the board would fix this is there any chance the LED could be the issue? I noticed there is a high power board really next to the larger board. Maybe I replaced the wrong board?

 Share
Go to topic listing
×
×
  • Create New...