Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 28 June 2025 02:00 PM Until 03:00 PM
      0  
      All are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is available to everybody, including you! You don't have to be a member of Appliantology to join the fun.
      When: Saturday, June 28 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to register. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it. 

Recommended Posts

Posted
Manufacturer: Electrolux
Type of Appliance: Dryer
Model Number: EFMG527UIW0
Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes
Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): Yes

I have an inop Electrolux Dryer Mod#EFMG527UIW0, Ser #4D01104204; Both the User Control and Display Board #5304515232 and the Main Control Board #5304515410 have been installed, but they are not communicating. Was told that these boards will need to be programmed, but I have no details on how to accomplish this. If anyone could provide 1) a service manual on this unit and 2) any information on how to get these electronics flashed/functional, it would be greatly appreciated. 

Thank you,

 

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • DRubin

    2

  • Son of Samurai

    1

  • Vance R

    1

Top Posters In This Topic

Posted

Uploaded parts list and tech sheet, pending approval:

 

  • Team Samurai
Posted

Approved -- thanks, Vance!

Posted

Thank you very much, Vance. I do appreciate it. 


×
×
  • Create New...