Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


Rhubarb Tau's Sloggy Vlog Blog Bog

  • entries
    2
  • comments
    2
  • views
    4,001

Entries in this blog

Testing HSI Ignitor Amps at Low Voltages

I posted this in reply to a Tech Forum post (linked below), but thought I would cross-post here to keep track of it, as well as to have a place to post any follow up testing I did a quick test of Hot Surface Ignitor amps at different voltages, and what I measured was way more linear than I expected. See graph below. I used a variac to vary supply voltage to a brand new Robertshaw 41-205 rectangular HSI ignitor. I measured the ignitor current at 5V steps after a little settling time until th

Rhubarb Tau

Rhubarb Tau in Science Try-Its!

×
×
  • Create New...