Jump to content
LIMITED TIME OFFER: Get up to $100 off tuition for Master Samurai Tech courses through November 30th ×
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


Samurai Appliance Repair Man's Blog

  • entries
    861
  • comments
    1,408
  • views
    3,333,731

GE Top Control Dishwasher Recall and Installation Instructions for TCO Shield Kit


Here it be in case you need it. Courtesy of GMF Reginald:

GE Top Control Dishwasher Recall

and Installation Instructions for

TCO Shield Kit WD35X10354X

2010_Top_Control_Dishwasher_Recall.pdf

Dear GE Customer Care Servicers,

On October 26, 2010, GE announced a Product Safety Recall on a limited number of GE Profile and GE Monogram branded dishwasher models.

This voluntary recall is the result of the determination that water condensation can drip onto the electronic control board during

normal wash operation, causing a short circuit and resulting in an overheated connector.

To eliminate this risk, we will install a thermal cut-off with fiber shield over the control board.

If the dishwasher appears to be non-repairable, follow your normal process and call the Technical Assist Group at (502)452-4700.

Coverage Period: No end date

No charge for labor

No charge for TCO shield kit

GE will provide a free repair to all consumers with units affected by the recall.

Consumers who wish to replace their dishwasher with a new model can use a GE rebate of $200 for the

purchase of a new GE Profile dishwasher or a GE rebate of $400 for purchase of a new GE Monogram dishwasher.

Details and forms are on our website www.geappliances.com/recall or at our retailers.

Source: blown fuse twice in three days GE Monogram dishwasher ZBD6880K10SS

0 Comments


Recommended Comments

There are no comments to display.

×
×
  • Create New...