All Activity

I need it too

86 that I found it part number W10476805 got the tech sheet here. thanks anyway!

Manufacturer: Naytag Type of Appliance: Refrigerator Model Number: MBF1953YEW3 Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): Yes Service manual or tech sheet. I need parts list as well thermistor and defrost Tstat not listed on Dey. thank you

Manufacturer: Franke Type of Appliance: Coffee Machine Model Number: A400 Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): Yes This might be a long shot. But I'm looking for any technical info i can get for the A400 machine. I recently fixed one at our local airport, but I have no idea how i did it. I'm flying blind on these things. But I have another one on the schedule today.

The "flag" will stop ice production when the bucket is full. There should also be an on/off switch on the icemaker. Make sure water is on. Confirm there is a filter or bypass plug in the filter housing. There should be a tech sheet in or near the rear panel by the compressor, there may be an Icemaker test mode in it, I cant remember as Ive been using bluetooth to diagnose these units for years now. Keep in mind, the icemaker may have just pooped out on you, wierder things have happened.

Uploading service data sheet, parts list and waiting on approval:

Manufacturer: Franke Type of Appliance: Coffee Machine Model Number: A400 Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): Yes This might be a long shot. But I'm looking for any technical info i can get for the A400 machine. I recently fixed one at our local airport, but I have no idea how i did it. I'm flying blind on these things. But I have another one on the schedule today.

Manufacturer: Frigidaire Type of Appliance: Range Model Number: FCFE2425AS Have you validated the model number at an online parts site like Repair Clinic? (yes or no): yes Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): yes Appreciate it!

Thank you for the reply. I emptied out the fridge and then just tried turning up the cold setting. That seemed to get it out of its funk. Went from 60 degrees to 35. Hopefully it will play nice from now on. Thank you again for the advice Matt

Description Join the Team That’s Improving Life in Every Home At Hoffmann Brothers, our mission is simple yet powerful: Improving Life in Every Home—for our customers, our team members, and the communities we proudly serve. With over 40 years of industry leadership in HVAC, plumbing, electrical, and appliance repair, we’ve built a reputation for excellence in St. Louis—and now we’re bringing that same level of commitment and care to Nashville, TN! As a multi-time recipient of Top Workplace and industry awards, we believe the key to exceptional service starts with an exceptional workplace. We invest in our people so they can deliver their best to our customers, every single day. Why Hoffmann Brothers? We offer more than just a job—we offer a place to build a rewarding career: Competitive Pay: $25–$38 per hour, based on experience 100% Employer-Paid Medical, Dental, and Vision Coverage for you and your family Paid Time Off—Starting Day One 401(k) with a 4% Company Match Supportive, Team-Oriented Environment Paid Training & Leadership Development Programs Opportunities for Career Growth and Advancement Now Hiring: Senior Appliance Service Professional – Nashville, TN We’re looking for an experienced and motivated Senior Appliance Service Professional to join our growing Nashville team. In this role, you’ll be the trusted expert customers rely on to service and repair a wide range of household appliances—including washers, dryers, refrigerators, ovens, dishwashers, and more. You’ll work closely with our customer experience team to deliver seamless, top-tier service—and make a meaningful impact in the lives of the homeowners we serve. Key Responsibilities: Diagnose, service, and repair a variety of home appliances Conduct performance tests and troubleshoot issues such as leaks or electrical faults Disassemble appliances to inspect components for wear, damage, or corrosion Replace or repair motors, circuit boards, heating elements, belts, and more Use schematics, wiring diagrams, and diagnostic tools (e.g., multimeters) Ensure EPA compliance in refrigerant recovery and recycling Maintain a clean and fully stocked service vehicle Educate customers on repair options and preventive care Follow company systems and processes to ensure quality and efficiency What We’re Looking For: 5+ years of experience in appliance repair, including sealed systems Strong diagnostic, technical, and mechanical skills Excellent communication and customer service abilities Organizational skills for accurate job documentation Willingness to mentor and collaborate with other technicians Commitment to safety, cleanliness, and professionalism A positive attitude and desire to grow with a supportive team If you're passionate about your craft and ready to join a company that values your expertise, we’d love to hear from you. At Hoffmann Brothers, your work matters—and so do you. Sr. Appliance Field Technician - Hoffmann Brothers

Here you are sir.

I have spent a few bucks over the years on Premier "galaxy" 24" standing pilot gas range, had gas safety valve rebuilt, new stovetop, burners, grates, but now the thermostat seems to have failed, Premier doesn't seem to have any records going back that far as to what thermostat it should be - said I could try 1194 or 1199, however my gas lines go straight across perpendicular to the stovetop, not from behind. I will try to attach pics, black markings on back say 7918 if I reading them correctly, 3 phillips head screws seem to hold the brass back plate on where this number is stamped. Any info on who would rebuild this (TOAC says too new for them, they have no kit to rebuild it) - was looking on ebay and other sites to see if I saw one similar - surprised I couldn't find cross-referencing material that would say which thermostats would be compatible with this model number Premier gas range. 43F4FEA7-1580-4088-B1A6-12E3A37EEE7F.heic 921CBB27-C58F-44C9-9518-6BD656800C6E.heic B6024AB8-4D7C-409A-84B6-9655C394F022.heic

Hi Brian. Thanks so much for the reply. Yes, the drum does not turn (I did as you instructed). I will open up the dryer and check on the belt and/or belt mechanism. Hopefully, it'll be one of these - the easiest one preferred - and I'll clean as well while I'm there. I'll keep you posted. ~Joey

Any update? I'm working on one of these now. Customer said the display is flashing and won't respond to anything. Cycling power will allow it to work for a while, but it eventually happens again.

This may not be the exact dryer but it comes apart the same way.

Sounds like the motor is running. Is the drum turning? Open the door, hold the door switch closed and start the dryer. The drum should be turning. If not, mostly likely cause would be a broken belt (#341241) or the belt idler popped out of position, or the belt drive pulley broke or came off of the motor shaft. Easy fix and certainly worth repairing if that's all it is.

The attachment is just a sound recording of the sound it makes. Hopefully, it'll help in diagnosing the issue.

Manufacturer: LG Type of Appliance: Washer Model Number: WT8480CL Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): Yes I’m working on the new LG top load and would like to see the tech manual. thank you.

Is this worth fixing? Dryer only makes a "whrrring" noise (as if it's working normally) but does not spin or generate heat, no matter what setting I put it in. Appreciate any help. Non working dryer.mp4

Here is the video showing the oven and the test I did at the heating element. oven.MOV

Uses this tech sheet: May have some similarities to Parts of this manual:

Hi Vee 8. hope repairing has been good with you. thanks for reaching out. Yes I did google the board and I had pulled up the same video you had sent. This mounted board under neath is not quite like the normal ones they have . it is actually comprised of 3 parts. The board , the housing , and the 3rd part is a square plastic mounting type of bracket that themouldehousing goes into. wiring harness is attached to external molded clips that are moulded into the side of housing, Another tech I know in my area couldn't get the board out and asked for my help. Not sure why he had a hard time figuring it out. The boards are designed to come out through the kick plate but and I have done the one in the video you sent many times. I told him I would help him out next week. If I recall . I believe I did one of these several years ago. so I know its coming out through the kick board area.I think If I remember correctly the wiring harness is so tight and attached to the under side of the refrigerator that you can only slide it out like a 3rd of the way out of the brkt and it wouldn't come out any further. I believe the wiring harness has to be pulled out of the clips first and then slide it out . i think it will not slide out all the way and you really have to pull the housing forward enough to the point you think your going to rip wires or cut something out of the wire harness connection but it will eventually give you enough room to replace the board. I believe I also looked into the back mechanical room area to see if there might of been a clip on the wiring harness in the mechanical room that might have been needed to be released to give it more slack to come out of the bottom front easier but did not see anything. In the end If I remember correctly. I think I had to just pull on the harness connection heavily to the point that you think your going to break something and it stretches out from the kickplate area to where you barely get enough room to remove the board or the board and housing to disconnect it. I was surprised the tech couldn't get it out and needed help. I was basically wondering if there was a simpler way of getting it out through the kit plate area. I will post back here what I actually experienced taking it out at the bottom kick plate and update that back here. Thanks again for chiming in here.

Thanks again!!!