Search the Community

The bake and broil do not heat up. I have 120 to ground on both incoming feeds to the oven and 230 line to line. When I set to broil or bake I measure 120 to ground on both elements no matter what I try either broil or bake. Checking the voltage on the control board all have 120 to ground as well. When using broil I thought only the top heating element should get voltage but both elements do. Same when I push bake. I have 120 on both sides of each element to ground. However even though both have volts neither gets hot. The oven will get a little warm but none of the elements turn red or orange and can be held. When I shut off whichever mode either bake or broil voltage goes to zero so I know the relays are working. I also measured ohms at the temp probe unplugging it from the controller and it measures correctly. About 1090 ohms at about 72 to 75F. Resistance on the broil element is 22 ohms and resistance on the bake element is 19.6 ohms. Any idea why the elements will not get hot? Im thinking something in control board but again there is voltag going to the elements. Both elements no matter if I try bake or broil. Any advice is much appreciated.