MAYTAG TOP LOAD WASHER - MODEL MAV551EEWW
I’ve got a Maytag Top Load Washer - Model No. MAV551EEWW - and I’ve recently had to replace the Drain Pump when it became noisey. Before concluding that I needed a new Drain Pump, I had taken the washer almost completely apart (removed wiring connections from control board, removed ground wire screws, removed drive motor, removed drive belt, and finally removed drain hoses/pump) - after receiving the new Drain Pump and installing it, I’ve got everything all but put back together....The ONLY thing I’ve now run into is I cannot remember where all the ground wires either screw/mount onto the frame!! Help!!! There are a total of either four or five ground wire connections - two are located by the drive motor; one connects to the frame of the washer cabinet, the he other connects to the mounting plate for the motor - then the other two or three grounds are up top by the control panel/power cord wiring/front panel/lid switch. Please help me figure it out - I know it’s a grounding issue because I’ve tripped our breaker three times for the outlets/lights in our laundry room upon trying to plug the washer in to test the new pump!