Search the Community

The current status is: Dryer works fine Washer light comes on when activated (i.e. pull the knob out) Washer does not Fill with water Rotate Drain (based on sound) I'm looking for information to help me find the pump (ic) board; check the fuse; test the pump I don't know if I have multiple failures (perhaps caused by the impact when the spring broke): the speed controller, the pump, etc. Please advise History, oldest to most recent Washer ande dryer worked fine Loud noise and washer stopped rotating in any mode Diagnosed a broken support spring Received and installed a replacement spring (and a replacement electric washer moter, belt, and schocks ready to return for a refund) Washer fills but does not spin. During what would be wash cycles, the drum rotates rarely and slowly. Drain pump makes a lot of noise Remove drain hose (drump to pump) and empty coin trap (it was full) Reinstall drain hose Washer fills but does not spin. During what would be wash cycles, the drum rotates rarely and slowly. Drain pump makes a lot of noise Attempt to clear hose from pump to exit pipe