Jump to content
Click here to check out our on-demand appliance repair training webinars.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 26 April 2025 02:00 PM Until 03:00 PM
      0  
      All are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is available to everybody, including you! You don't have to be a member of Appliantology to join the fun.
      When: Saturday, April 26 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to register. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it. 

New Appliance Service Manual added: GE Advantium 120 Speedcooking Oven Service Manual


Recommended Posts

  • 3 years later...
  • Replies 1
  • Created
  • Last Reply

Top Posters In This Topic

  • Samurai Appliance Repair Man

    1

  • AtomicSteve

    1

Top Posters In This Topic

Posted

Having trouble with a model scb1000kww01.  Initially there was no display.  It still functioned fine if you know what to push.  I found that the digitron was suspect and replaced it.  I then have fixed the display issue with a strange flickering still showing on time digits as if the segments are lighting on their own in a wave fashion from left to right.  I went through all the solder connections to see if any cold joints or issues.  I touched up a few suspect points on power board but the rest looked ok.  All functions were perfect other than the flickering display.  My parts supplier let me exchange to see if I had a bad digitron but the new replacement has the same problem.

I left it as a flickering functional unit to research more but customer called back to say totally dead.  I went back and it was dead.  Unplugged and checked fuses and tco's.  All ok...then plugged in and all ok again with the flickering display still happening.  

I left again but just received a note that it is dead yet again.  

Anyone have any of these same issues?  I will go back but hopefully with new knowledge.  I plan on using this manual to go section after section to retest and see what I missed.  Argh!

 


×
×
  • Create New...