I need a tech sheet for this oven. 79046813991

[MAjscott]

Manufacturer: Kenmore

Type of Appliance: Range

Model Number: 79046813991

Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes

Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): yes

The hinges on the range are bent.  Need a tech sheet to understand the hinge

[Samurai Appliance Repair Man]

Weird-- it's a good model number because it pulls up at the Sears site but I can't find any tech info on it at the Frigidaire B2B site. Hopefully someone else can help us out. 

[Hiroshi]

It is a hinge and roller model... so you lock the hinge when you have the door open, then remove it as you make the motion of closing the door again...

 

[Samurai Appliance Repair Man]

Thanks for pointing that out, Hiroshi. 

That service manual was already in the Downloads section. I'll go ahead and include the link here: 

 

[MAjscott]

On 10/21/2016 at 3:30 PM, Hiroshi said:

 

It is a hinge and roller model... so you lock the hinge when you have the door open, then remove it as you make the motion of closing the door again...

 

The one hinge is bent.  So, it doesn't lock like it should.  I appreciate the input.  Ill check out the manual above.

[Here Now Tech]

That manual doesn't look close to the slide in 79046613502

 

Doesn't include error codes or schematic for mine.

[Captain Dunsel]

@Here Now Tech It is best to start your own request or new thread!

[Here Now Tech]

Others have and they're referred to the same file. Which doesn't have vital info. But yeah, I'll do that and see what helpful response I get.