Dometic Microwave Parts needed or aid in repairing

[computerpulse]

I have a Dometic Microwave model 56-2272-10/02, I believe this was made by Frigidaire.  Manufactured by reads WCI

I am in need of a control board, or help repairing the control board.  have not found the part to be available.  Any help would be appreciated.

[johntech]

I found the same thing part Nla. This is a printed circuit board and normally considered disposable but if it was just a bad component then you may be in luck but good luck finding the specs. Hat is it doing or not doing?

[Budget Appliance Repair]

One on Ebay for $96.00 or Make Offer, (FREE Ship)

And one shown at Appliance Parts Company in National City branch, ($127.06 + Shipping) http://www.appliancepartscompany.com/product/15655575

 

[computerpulse]

5 hours ago, johntech said:

I found the same thing part Nla. This is a printed circuit board and normally considered disposable but if it was just a bad component then you may be in luck but good luck finding the specs. Hat is it doing or not doing?

Key pad not functioning correctly so it won't start.  Erroneous display

[computerpulse]

5 hours ago, Budget Appliance Repair said:

One on Ebay for $96.00 or Make Offer, (FREE Ship)

And one shown at Appliance Parts Company in National City branch, ($127.06 + Shipping) http://www.appliancepartscompany.com/product/15655575

 

Yes I saw the one in california, however it's not economically feazable, the one on eBay is not the correct board

[Budget Appliance Repair]

Sounds like the board isn't the only problem.   The "Erroneous display" sounds like a possible board problem but won't start is maybe bad keypad also unless all other keys work but display just comes up weird.

Generally speaking these counter-top microwaves are never economical to repair unless it's to just replace a fuse and/or door switches and that's if you don't have call someone and pay a service charge.

You can get a brand new counter-top microwave any day of the week at K-Mart, Wal-Mart, Target for $59 - $79.

[computerpulse]

Anyone have an idea on how to test the push button board?