Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 04 January 2025 03:00 PM Until 04:00 PM
      0  
      All Appliantology tech members are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This event is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, January 4 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Recommended Posts

  • 4 months later...
  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

  • Samurai Appliance Repair Man

    1

  • Lighthouse

    1

  • good job repair

    1

good job repair
Posted

NEED HELP /

COMPRESSOR IS NOT WORKING.

CHECK INVERTOR BOARD CONNECTOR HAS 120VAC IN BUT NOT 240VAC OUT.

CHK THE OHM OUT AT EACH PINS AT COMPRESSOR WHICH IS OK. NO OPEN/  NO SHORT

THE INVERTER BOARD IS MADE BY PANASONIC P# MCBE2UN.

I COULD NOT FIND THE INVERTER BOARD.

I EVEN ORDERED THE COMPRESSOR THAT COME W INVERTER BOARD

WHICH IS DIFFERENT.

I REPLACED INVERTER BOARD. COMPRESSOR STILL NOT WORKING

ANY SUGGESTION??

 

JASON

GJR, LLC

  • Team Samurai
Posted

Hi Jason, welcome to Appliantology!

To get help, start a new topic in the Kitchen forum. 

Also, watch the orientation videos on this page to get the most out of your Appliantology membership.

×
×
  • Create New...