Jump to content
LIMITED TIME OFFER: Get up to $100 off tuition for Master Samurai Tech courses through November 30th ×
Click here to check out this guide.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 23 November 2024 03:00 PM Until 04:00 PM
      2  
      All Appliantology tech members are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This event is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, November 23 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Recommended Posts

Mike Emelio
Posted

Starting a week or so ago occasionally herd a fan 'cycle'...run for 2-3 seconds, then spin down and immediately back up. As of today it's doing it constantly. I have cleaned out the condenser coils and verified that its the condenser fan making the noise, I have run the diagnostic test #49 as mentioned in another post and it cycles at around 1700-1750, but it will dip to +/- 0, 420, 1200 mostly it stays in the 1700 range.

I believe it to be the circuit board as the main problem and possibly the fan, but it does spin based on the reading on this site and others.   I plan on replacing the circuit board and fan at the same time.  If my logic is off please let me know.

When replacing the circuit board, is it just a plug in and replace or is there any type of setup/programing that needs to happen

Any help or insight would be greatly appreaciated

Mike

 

 

  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

  • Mike Emelio

    2

  • strumpfman

    1

Top Posters In This Topic

Posted

Here is the link to a very good discussion I had with brother Durham a few years ago. Hope this will help you

to decide on board or fan. BTW I hardwired the fan as suggested by Durham and fridge is still good !!

 

 

Mike Emelio
Posted

Thanks for responding to my question, site will not allow me to access the link as my membership a non appliance  tech. 

I am leaning to just replacing the board and fan and that should fix my issues if I have troubleshooted them properly

Mike

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...