Jump to content
LIMITED TIME OFFER: Get up to $100 off tuition for Master Samurai Tech courses through November 30th ×
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 07 December 2024 03:00 PM Until 04:00 PM
      1  
      All Appliantology tech members are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This event is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, December 7 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Recommended Posts

Posted

I have the above listed Kenmore freezer that isn’t cooling. It was gifted to us so there’s no warranty available. We changed the evaporator fan motor but it isn’t turning at all. I also notice that the evaporator isn’t cold or frosty at all. I also can’t hear or feel the compressor running. Open the door and hold down the door switch and the evap fan doesn't run either. Warm enough to where it should run, hasn't run at all. Interior light turns on, green power light on the front is on. No hum, no buzz, no nada. Went & got a multi meter and used YouTube vids to test the compressor ohms (all good). Even tried manually spinning the defrost timer with no change. What’s next? Where would you start troubleshooting? How do I get the freezer into diagnostic mode to check the fan, etc? I can’t seem to find a service manual online at all.

  • Replies 5
  • Created
  • Last Reply

Top Posters In This Topic

  • 16345Ed

    3

  • Saralyn

    3

Top Posters In This Topic

Posted

Need to see if there is 120 AC at compressor. 

Posted

Could be bad start relay, or bad cold control(thermostat). 

 

If power is found at compressor, bad start relay. 

If no power at compressor, bad cold control. 

Posted

Is the thermostat what is connecting around the evaporator coils? It’s good from what I can tell, no expansion popping the cap off and it has connectivity according to the multi meter and the YouTube vid I used.

How do I check the voltage to the compressor?

  • 3 weeks later...
Posted

Turns out it was a defective temperature control switch! All fixed now for <$25! ?

Posted
On 10/5/2018 at 5:46 PM, 16345Ed said:

If no power at compressor, bad cold control. 

 

Yep, that was one of the possibilities...

Good job!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...