Jump to content
LIMITED TIME OFFER: Get up to $100 off tuition for Master Samurai Tech courses through November 30th ×
Click here to check out our on-demand appliance repair training webinars.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 07 December 2024 03:00 PM Until 04:00 PM
      0  
      All Appliantology tech members are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This event is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, December 7 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Washer/dryer GLGH1642FS5 (seems the same as Frigidare front-loader) various symptoms leadind to dead washer


Recommended Posts

Posted

The current status is:

  • Dryer works fine
  • Washer light comes on when activated (i.e. pull the knob out)
  • Washer does not
    • Fill with water
    • Rotate
    • Drain (based on sound)

I'm looking for information to help me find the pump (ic) board; check the fuse; test the pump

I don't know if I have multiple failures (perhaps caused by the impact when the spring broke): the speed controller, the pump, etc.

 

Please advise

 

History, oldest to most recent

  1. Washer ande dryer worked fine
  2. Loud noise and washer stopped rotating in any mode
  3. Diagnosed a broken support spring
  4. Received and installed a replacement spring (and a replacement electric washer moter, belt, and schocks ready to return for a refund)
  5. Washer fills but does not spin. During what would be wash cycles, the drum rotates rarely and slowly. Drain pump makes a lot of noise
  6. Remove drain hose (drump to pump) and empty coin trap (it was full)
  7. Reinstall drain hose
  8. Washer fills but does not spin. During what would be wash cycles, the drum rotates rarely and slowly. Drain pump makes a lot of noise
  9. Attempt to clear hose from pump to exit pipe
  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

  • RichardHaven

    2

  • 16345Ed

    1

Popular Days

Top Posters In This Topic

Posted

Remove pump and inspect impeller for debris. 
 

if pump is making noise it’s getting power. 

Posted

I was making noise, now nothing happens

Did I burn out the pump, or might a fuse have blow? Where should I look on the conotrol harness?

 

Thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...