Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 5/10/2025 @10 AM ET
      10 May 2025 02:00 PM Until 03:00 PM
      1  
      All are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is available to everybody, including you! You don't have to be a member of Appliantology to join the fun.
      When: Saturday, May10 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to register. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it. 

simplicity dehumidifier

timtoolman

By timtoolman
in DIY Appliance Repair Help

Recommended Posts

timtoolman

timtoolman

Posted
Posted

I have a simplicity dehumidifier  model# 43-5400-6.  it was running fine until a couple months ago. unit approximately  2 years old.  last off the water seemed a little dirty in the reservoir.  i disassembled and cleaned fins which were very dirty and dusty and i checked the humidistat with my digital ohm-meter and it seemed fine.  it still runs and sounds as the day i purchased it.  you can hear the compressor kick in but there is not a stain of water being collected in the reservoir, i left it on overnight and no water to be seen.

timtoolman

  • Replies 0
  • Created
  • Last Reply

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
×
×
  • Create New...