Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 10 May 2025 02:00 PM Until 03:00 PM
      0  
      All are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is available to everybody, including you! You don't have to be a member of Appliantology to join the fun.
      When: Saturday, May10 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to register. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it. 

New Appliance Service Manual added: Whirlpool WFW3090GW2 WFW5090GW2 WFW3090JW0 WFW5090JW0 Washer Service Pointer Door Locked but Washer Won't Start


Recommended Posts

  • Team Samurai
Posted

Whirlpool WFW3090GW2 WFW5090GW2 WFW3090JW0 WFW5090JW0 Washer Service Pointer Door Locked but Washer Won't Start

View File

 

Whirlpool 24" Front Load Washer Door Locked but Washer Won't Start

WHIRLPOOL WASHERS

Models: WFW3090GW2 WFW5090GW2 WFW3090JW0 WFW5090JW0

Serial Numbers:

For Models WFW3090GW2 and WFW5090GW2: CF81500000 - CF84510000 For Models WFW3090JW0 and WFW5090JW0: CF90320000 - CF93599999

Possible Concerns:

The technician may find that the door is locked but the washer won’t start, tumble, or spin.

  • ●  The customer may complain that the cycle did not complete, long cycle time, or stopped

    mid-cycle and won’t restart.

  • ●  The unit may check out fine in diagnostic mode but still will not complete a cycle.

  • ●  The unit might display “dEN” or other not listed error code.

  • ●  The unit might show “Maximum Spin Speed Not Reached” error code F34 during the service

    test cycle.

PUB W11395614A 


 

  • Replies 0
  • Created
  • Last Reply

Top Posters In This Topic

  • Samurai Appliance Repair Man

    1

Popular Days

Top Posters In This Topic


×
×
  • Create New...