Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • entries
    5
  • comments
    59
  • views
    2,689

About this blog

Let us attend! 

Entries in this blog

Field report

WPL D/W Nuisance F8E4 (overflow/leak)

I went on a Whirlpool dishwasher that was giving the homeowner an intermittent F8E4 error. The F8E4 error is an “overflow” error, which actually is any condition that causes water to exit the unit and spill into the drain pan, this in turn causes the float in the pan to rise up and trigger the float switch, which triggers the board that there is a flood condition. The unit will then exit the cycle and begin the flood sequence of running the drain pump continuously, the display will flash the F8E
Koi Guy

Koi Guy in Field report

6
Field report

WPL dryer timer- intermittent heat

As you’ve probably seen, the new Whirlpool dryer timers have not been very robust and are prone to several failures. These failures include: no heat, intermittent heat, not advancing the cycle, and not ending the cycle. A service call yesterday was for a “not drying clothes” complaint. Now I normally associate a dryer that’s heating but not drying clothes as a possible exhaust restriction, and that would be my first test- airflow. BUT, when it’s a Whirlpool built unit with a timer- the firs
Koi Guy

Koi Guy in Field report

12
×
×
  • Create New...