Jump to content
LIMITED TIME OFFER: Get up to $100 off tuition for Master Samurai Tech courses through November 30th ×
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


Samurai Appliance Repair Man's Blog

  • entries
    861
  • comments
    1,408
  • views
    3,331,619

How to troubleshoot an LG front load washer with no display or power


Remove the Top Cover of the washer.

Trace/follow the *plug* inside the washer---to the Electrical Noise Filter (6201EC1006L)

Pull off the *white* plug---use a test meter to check for 120V at the *white* plug (if no power---the fault is outside of the washer)

Re-connect the *white* plug back into the Noise Filter

Pull off the *pink* plug from the Noise Filter---test for 120V at the **Noise Filter** (NOT at the pink plug)

If no 120V at the Noise Filter---replace it.

If 120V is measured at the Noise Filter---replace the Main Board (EBR64144911)

Source: LG front load washer, no power

0 Comments


Recommended Comments

There are no comments to display.

×
×
  • Create New...