FAQs | Repair Videos | Academy | Newsletter | Contact
Search the Community
Showing results for tags 'motor test'.
Found 1 result
-
Hi guys, I need some help. The symptom is it won't start- I've looked through all the posts I could find. I think it's the motor, or the control board. I've taken apart the whole dryer. No codes. Tested the door switch, the belt switch. the thermal fuse is good. the motor windings seem low. The main was 2.1 ohms, start was 2.0 ohms. spins freely. The control board doesn't have any burns or anything that looks abnormal. I also tested the P1-3 and P1-4 leads and the resistance was in spec, so it says to replace the board. I really don't want to spend 300 bucks on a board if that's not the problem, or if I can just solder a new relay on the board. I can hear the relay click when I hold start in the diag mode. my question is: how do I check the control board, the motor relay, and the motor? Thanks in advance, Marc
