FAQs | Repair Videos | Academy | Newsletter | Contact
Search the Community
Showing results for tags 'noisy'.
Found 2 results
-
LG 349R refrigerator. Noisy Condenser fan motor4680JB1035H. Can I replace ball bearings?
benyamin39 posted a topic in DIY Appliance Repair Help
Hi. I have a LG refrigerator model 349R. It is in very good condition, the only problem is the condenser fan motor that gets noisy some time. I remove the part and spinned the axis. I heared some squeaking so the problem is the motor. I opened it and here are the pictures. Is there an alternative to replacing the entire motor : 1. Can the ball bearing be removed and replaced? 2. Is there a way to grease it (although I believe those bearing are not meant to be greased) 3. What is the purpose of the hole on the side. I found some sort of gum in it. Thx for your help
-
Whirlpool Cabrio Washer - WTW8800yc0 - stops randomly - noisy
johnlec posted a topic in DIY Appliance Repair Help
Washer will stop at random points. Diagnostic mode did not show error codes. I ran the Automatic Diagnostic Test Mode. Unfortunately, I did it incorrectly, there was laundry in the machine. At the C9 step, there was constant grinding/rattling noise. After this test the machine registered a 4A error code. I do not see this code anywhere in the tech sheet. When starting a cycle there is the same grinding/rattling noise. The suspension rods and springs are rusty but they are intact. I posted about this machine previously and found out the tub was stuck. we have been using this machine since March with reasonable success. Any advice/suggestions are appreciated!
