Jump to content
LIMITED TIME OFFER: Get up to $100 off tuition for Master Samurai Tech courses through November 30th ×
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 23 November 2024 03:00 PM Until 04:00 PM
      2  
      All Appliantology tech members are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This event is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, November 23 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Recommended Posts

Posted

I have a Kenmore 790.71513400 gas range that the oven will not light. When this started I assumed it was the igniter again, I had replaced it approximately three years ago. You could hear the relay snap after setting the oven temperature on the panel, but the igniter would not glow. I replaced the igniter, but it still does not glow/light. Again, you hear the relay snap, but that is it. I took apart the igniter wiring to check for bad connections or corrosion, and the smaller spade terminal on the gas safety valve didn't look too good. All of that is cleaned up now. I have not checked for voltage, would that be my net step?

  • Replies 1
  • Created
  • Last Reply

Top Posters In This Topic

  • john63

    1

  • mzr

    1

Popular Days

Posted

Yes.

Check for 120 volts to igniter...when oven has been turned on.

If no voltage...failed Electronic Oven Control.

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...