Search the Community

Help. I have a 12 yr old KitchenAid KGSS907SSS01 gas range. The bake burner works good, as do all of the 4 burners on the cook-top. The broiler starts ok and after a few seconds there is a click sound and the flame goes out. A friend of mine and I took the range apart and used a multimeter to try to find a an obvious problem with no luck. The Thermostat appears to be ok. Separately, the convection fan doesn't come on anymore (not that it was used much anyway).

Bosch wall oven, microwave combo, HBL5750UC/08 Problem: In any cook mode but off, broiler element comes on and stays on. This used to happen intermittently, now all the time. Eventually the over-temp sensor will trigger and turn it off. Turning oven to "off" will turn off broiler element. Built-in diagnostics (from downloaded service manual) don't show any relevant faults. Temp readings from sensors (again, using built-in diagnostics) seem accurate. Using diagnostics to turn on broil element turns it on, but again, will never turn off. All of this leads me to believe it is a stuck relay? Question: I've seen references to a "control/relay board" and a "relay board". I suspect one of these components. Control/Relay board comes up as Bosch part #12022212. This board looks like it has many small relays on it. Relay board comes up as Bosch part #00663802. This looks more like a power supply board than a relay board. Should I replace the relay board?

tired to bake at 350º the other night and had a broiled loaf after 15 minutes at most. about 10 years old Relay board? Replace the whole board or can one specific relay be pointed to and replaced (if the are OTS relays and not proprietary.)