Team Samurai Samurai Appliance Repair Man Posted October 25, 2013 Team Samurai Posted October 25, 2013 File Name: Whirlpool Gas Freestanding Ranges with Direct Spark Ignition (DSI) Control Service Pointer: Spark but no IgnitionFile Submitter: Samurai Appliance Repair ManFile Submitted: 25 Oct 2013File Category: Appliance Repair Manual Pot Luck SupperGas Freestanding Ranges with Direct Spark Ignition (DSI) Control All Code Dates Concern: Under certain circumstances the Bake burner may not ignite. Sparking is taking place but flame is not established. Cause: • Wiring harness may be pinched at a location between the Bake/Broil igniters and DSI Board. • DSI Board mounting bracket may be contacting a solder joint on back of the board. • Positioning of Igniter and gas burner igniter ports may be out of adjustment. • Igniter (Electrode) deteriorationTechnical Service Pointer #: W10622771Release Date: October, 2013Click here to download this file 1
jmfister Posted February 17, 2014 Posted February 17, 2014 Another good thing to check is a bad ground wire. You can add a better ground from the burner air flap to the chassis. Would love to download the service pointer
Recommended Posts