Jump to content

Learn appliance repair at the Samurai Tech Academy.  Learn more.  Earn more.

Parts Search
Site Search

FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact

Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource!

The world-famous Samurai Appliance Repair Forums

To get started, click here.

Already a member of Appliantology? Just sign in with your username and password in the upper right-hand corner of the screen.


Samurai Appliance Repair Man's Blog

Using an Airflow Meter to Check Your Dryer Vent for Safety and Efficiency

Posted by Samurai Appliance Repair Man, in Appliance Repair Service, Repair Videos, Dryer Repair 20 February 2013 · 4,150 views
dryer, vent, back pressure and 4 more...
In this journey into appliance repair enlightenment, Samurai Appliance Repair Man shows you how to use an airflow meter to analytically test the back pressure on a dryer vent for safety and efficiency. Looks can be deceiving, as this video shows, and even a short simple dryer vent that appears to be ideal can have airflow problems. So it's always wise to use a meter to actually measure the back pressure.

Here's the air flow tester I used in the video ==> http://www.repaircli...0106710/1447456

Posted Image

To learn more about your dryer or to order parts, click here.

How to Replace a Radiant Burner in a Jenn-Air Glass Electric Cooktop

Posted by Samurai Appliance Repair Man, in Oven-Range-Stove Repair 20 February 2013 · 1,852 views
Jenn-Air, jennair, cook-top and 1 more...

from the service manual:

Main Top Removal
1. Disconnect power to cooktop.
2 Remove cooktop from installation position and place face down on protected surface.
3. Remove screws securing main top to burner box bottom.
4. Remove screws securing control panel box and conduit mounting plate to burner box assembly.
5. Remove main top.
6. Reverse procedure to reassemble, verifying that cooktop frame is properly aligned.
NOTE: Make sure the pieces of insulation, located in the front left and right rear corners,
are put back in place.
Failure to do so could create excessive cabinet temperatures.
Posted Image

Part link for the replacement burner ==> http://www.repaircli...mber=JEC0536ADB

Posted Image

To learn more about your cooktop or to order parts, click here.

Source: JennAir Glass Cook Top Model# JEC0536ADB, Replacing Burner, How to Remove Top?

Resetting a GE Hydrowave Top-Loading Washer

Posted by Samurai Appliance Repair Man, in Repair Videos, Washing Machine Repair 20 February 2013 · 949 views
GE, washer, hydrowave, hydrawave
If you have a newer model GE top-loading washer (GE's Hydrowave line of washers) and it inexplicably stops working, won't run at all, the problem may be as simple as needing to reset the control board. Very easy to do and no tools are required:

To learn more about your washer or to order parts, click here.

Source: GE Hydrawave Washer Motor Reset

Like - Plus - View - Connect

Facebook-icon50x50.png google-plus-icon-50x50.png YouTube-icon50x50.png linkedin-icon-50x50.png

Appliance Tech Training Scholarships for Veterans


Search My Blog

Latest Visitors

Random Album Image

Trailer Home Service Calls Are The Worst

7 user(s) viewing

0 members, 6 guests, 0 anonymous users

Google (1)

FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact

Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

Your Sometimes-Lucid Host:
Samurai Appliance Repair Man
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."

The Appliance Guru | Master Samurai Tech

Real Time Analytics