Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


Samurai Appliance Repair Man's Blog

A blog by Samurai Appliance Repair Man in General

  • entries
    862
  • comments
    1,409
  • views
    3,420,303

About this blog

Pearls of appliance repair wisdom from the Appliantology Forums

Read more  

Entries in this blog

How to retrieve the error codes in a Frigidaire Affinity front load washer

If you're having a problem with your Frigidaire washer, such as it won't start, one of the first things you'll want to do is get any error codes that may be stored in the control board. This can help point you in the right direction for finding and fixing the problem. Grand Master Reg gives us the key dance for this little procedure: Source: Frigidare Affinity ATF7000EG0 won't start
Samurai Appliance Repair Man

Samurai Appliance Repair Man

0

How to retrieve the error codes and enter diagnostic mode in a Whirlpool Duet Sport - Kenmore front load washer

If your washer stops mid-wash or starts flashing an error code or won't start at all, the first thing you'll want to do is retrieve any error codes that may be stored in the control module. This can give you a clue on where to start hunting for the problem. Grand Master Reg has posted the procedure for entering service mode in your washer so you can read any stored error codes and run the built-in diagnostic program: Source: Kenmore Front Loader Flashing Lights Mod#110.46462501
Samurai Appliance Repair Man

Samurai Appliance Repair Man

0

How to replace the washer drive belt in an oldie Frigidaire LC-248J top-loading washing machine

Here's the part link to the belt ==> http://www.repaircli...5303280326/3235 And here're some purdy-pitcher previews of where you'll be working: Click for large view - Uploaded with Skitch Pump detail: Click for large view - Uploaded with Skitch Belt and Idler Pulley detail: Click for large view - Uploaded with Skitch Source: Frigidaire LC-248J Not Spinning, Belt Worn, Need Directions on Replacement
Samurai Appliance Repair Man

Samurai Appliance Repair Man

1

How to replace the plastic condenser fan motor kit in an Amana-Kenmore refrigerator

This is kind of a funky little condenser fan motor kit to install and can be confusing, especially since the kit doesn't come with destructions. Here's the condenser fan motor kit ==> http://www.repairclinic.com/PartDetail/Condenser-Fan-Motor/12002738/1256875 Just be sure to use wire ties to secure fan motor leads back away from fan motor blade. This will prevent leads from blocking condenser fan blade. Master Willie offers some additional insight and analysis: Source: kenmore 59652673202
Samurai Appliance Repair Man

Samurai Appliance Repair Man

0

How to replace the Oil Seal Kit for gearcase input shaft on a Whirlpool Direct Drive Washer

Y'all go grab a brewski and kick back while Professor jumtrout 'splains it to us... And here's the part link for the oil seal kit you'll need ==> http://www.repairclinic.com/PartDetail/Oil-Seal/285352/470681 The kit comes with two different seals so it can work with different Whirlpool-built D/D transmissions. Use the one that's made for your transmission. Match 'em up by sight. Source: Kenmore 90 Series Washer 11020922990 Oil Leak
Samurai Appliance Repair Man

Samurai Appliance Repair Man

0

How to replace the motor brushes in a Bosch WFR2450 Axxis+ washer

If your Bosch washer won't spin or tumble, or the motor makes weird growling noises, you may need to replace the carbon brushes in the motor. Here's the part link to the replacement brush set ==> http://www.repaircli.../154740/1043249 And here's a pretty good video that shows you how to replace them: Although the video does a good job of showing you how to replace the brushes, Grand Master kdog offers the following clarifying comments on some of the other points mentioned in the video: So
Samurai Appliance Repair Man

Samurai Appliance Repair Man

0

How to replace the lid switch in a Whirlpool VMW washer

Example model number: WTW5640XW Here's part link to the replacement lid switch... http://www.repaircli...0404050/1938607 And here's how to replace it: - Tape down the lid - Remove the top screw from both hinged in back of the control panel. - Slide the top panel forward about 1/2" - Raise the front of the top panel up a bit - While keeping the front lip lifted, push it back a bit - Now tilt the top panel up on the rear hinges. Click for large view - Uploaded with Skitch Source: Whirlpool Washe

How to replace the heating element in an electric hot water heater without draining the tank

If you need to replace the heating element in your electric water heater, you may be thinking that you need to first drain the tank. You could do it that way but the Old Timers would shake their head at you and think, "What a rube." Below, a few of the Master Appliantologists here at the Academy offer some tips and procedures for repalcing the heating element with a tank full and not making a flooded mess: Source: suggestion for new electric water heater?
Samurai Appliance Repair Man

Samurai Appliance Repair Man

0

How to replace the drain pump in an LG front load washer stacked laundry unit

The need for this repair could be something obvious like the washer isn't draining (though other things can cause that, too, like a plugged drain hose) or something less obvious like an OE error code. First step is to come git you a new drain pump with a 365-day return policy ratcheer ==> http://www.repaircli...EA2001D/1266821 The Academy's resident Professor of LG-ology, john63, tiptoes us thru these tulips... Source: LG Front Load WM2077CW, won't spin
×
×
  • Create New...