Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


Samurai Appliance Repair Man's Blog

A blog by Samurai Appliance Repair Man in General

  • entries
    862
  • comments
    1,409
  • views
    3,419,759

About this blog

Pearls of appliance repair wisdom from the Appliantology Forums

Entries in this blog

How to read the cycle sequence chart on a Whirlpool GWS dishwasher

You know that complicated-looking cycle sequence chart on the techsheet for these dishwashers that no one uses because they don't understand it? Yeah, that one. We explained how to use it in the Appliantology Tips and Tricks webinar on August 11, 2019. It really is a powerful troubleshooting aid that lets you check all the functions and loads in the machine in just a few minutes. Appliantology premium tech members may watch the webinar recording here.     This webinar recording i

How to properly replace the thermistors in a refrigerator: an illustrated and annotated guide

A special treat today, kids: Sublime Master Bob-tech is featured in this week's edition of Techniques from the Masters™ for replacing the thermistors in a GE refrigerator. The technique demonstrated here is on a GE bottom-mount refrigerator but the same technique applies to all brands and types of refrigerators that use thermistors for temperature sensing. The idea is that you want those connections to have as little resistance as possible, ideally less than 1/2 ohm. Samsung, for example, pre

How to Pick the Best Appliance Repair School

Training is THE hot topic in the appliance repair trade these days. Experienced techs want to up their troubleshooting game and keep up with the newer models, and many new folks are looking for training in a skilled trade so they can get a job or start a business. Manufacturers and multi-truck operations have an ongoing virtual manhunt for skilled appliance repair techs. But they just don't exist because new technicians are not entering the trade at the same rate as old servicers are retiring. [

How to manually cycle the GE WR30X10093 icemaker

A useful and handy diagnostic technique when working on an ice maker problem is to manually initiate a harvest cycle to see with the ice maker will or will not do. Here's how to manually cycle the GE WR30X10093 ice maker: If the ice maker won't do the manual harvest, replace it. Here's the replacement you need: http://www.repairclinic.com/PartDetail/Ice-Maker-Assembly/WR30X10093/1399596 Source: how do you cycle test the WR30X10093 icemaker

How to install the upper rack stops and rack rollers in a Whirlpool-KitchenAid dishwasher

Both the upper rack stop and roller assembly in the Whirpool-KitchenAid dishwashers are amazingly simple to install... IF you know the trick. Ain't that the way it always is in appliance repair: it's all a cake-walk IF you know what you're doing. And that's a big fat IF. Problem is that most people don't know what they don't know but they THINK they know it all. Case in pernt: Had a customer call me yesterday (Saturday) because the upper rack in their dishwasher came out. They insisted that I co
Samurai Appliance Repair Man

Samurai Appliance Repair Man

0

How to install the heater kit on the dispenser of a GE refrigerator to stop it from freezing water in the tube

So you thawed out the dispenser supply tube and now the dispenser works again. All good, right? Wrong. Yes, you still need to install the heater kit. Don't believe me? Yeah, I know, I'm just a semi-lucid, mostly-fermented Samurai so, heck, I don't blame you-- half the time, I don't believe me, either! But perhaps you'll believe Chief Master Appliantologist DurhamAppliance: Here's the part link to the heater kit ==> http://www.repairclinic.com/PartDetail/Heating-Element/WR49X10173/1381601 Here

How to install a new water inlet valve in a Bosch WFMC front-loading washer

- unplug washer - turn off water supply at shut off valve on the wall - unscrew the water fill hoses from the washer - remove three torx screws in the back of the top panel - panel pull back and lifts off - water inlet valve is right there, remove obvious screws and wire harnesses and install the new valve Cold water valve: Click image to purchase. Hot water valve: Click image to purchase Source: Bosch WFMC3200UC Washing Machine
×
×
  • Create New...