FAQs | Repair Videos | Academy | Newsletter | Contact
Search the Community
Showing results for tags 'temperature'.
Found 14 results
-
GE Profile Artica PSS25MGNA WW Frozen Vegetables
BostonMike posted a topic in DIY Appliance Repair Help
Maybe someone can help before I drop big dollars on a new refrigerator, and/or my Wife kills me in my sleep Many moons ago I got information from the Samurai Appliance Man that my defroster was to blame for a different problem, they sent the parts and bang, back in service! I am hoping for a similar result. Model: GE Profile Artica PSS25MGNA WW Ser# AF 402267 Issue: Refrigerator too cold, frost in Freezer starting - this just started a few weeks back Testing: * Initial Temp Reading (Refrigerator on 1 Freezer on 2) was temp was 32 in the Refrigerator ( I was expecting 38-42 but that wasn't the case ) * Lowered settings (Refrigerator 1 Freezer 1) and the Refrigerator Side climbed to 36 - Food starting melting in the Freezer albeit slowly * Raised Freezer back to 2, Refrigerator at 1 and the Refrigerator dipped to 28 - the Freezer showed 9 degrees I was unable to access the Diagnostic Mode I have cleaned the coils, vents, checked door seals, taken temp readings etc - THOUGHTS? I am thinking a stuck damper at this point, but how to troubleshoot? Help me Samurai Von Kenmore, you are my only hope! Boston Mike
-
Model#WFE710H0AS oven heats to temp, and control shows correct but stops heating. heard an odd whirring noise a week ago, and though I saw small flame in oven. Threw breaker. Some smoke but no electric smell - couldn't determine what it was. Thought scrap parchment paper perhaps. Started again and Oven worked normal til yesterday used daily. have reset and still doing it. Suggestions oh wise ones? thankful humble apprentice since 2010 that foolishly lost login after last honorable repair celebration
-
GE Profile Side by Side Refrigerator has mild temperature fluctuations
backer36 posted a topic in DIY Appliance Repair Help
I bought a used GE Profile Refrigerator Side by Side from an appliance store last week. I hooked it up and it took probably a good 24hrs before it got down to temp (maybe a little longer). But, since then, it has continued to fluctuate up and down, never consistently holding a temperature. My settings are -1 and 35 degrees F for the freezer and refrigerator respectively. My freezer will go from -1 all the way up to 7 at some points (usually will hold around 4 for the longest I've noticed) and the refrigerator will go from 36 to 42 (usually will hold around 40-41 for the longest). Not sure what the heck these are symptoms of. My food seems ok and I haven't been able to see how ice handles in the freezer yet because the geniuses at GE decided to make their water line hookup 5/16 which isn't exactly a standard size. ANY help on what it might be or personal testimonies of what people have done will help. Refrigerator troubleshooting is not my strong suit. Thank you in advance!!! -
Whirlpool GI7FVCXWA00 French Door Refrigerator not cooling to temp
studioj posted a topic in DIY Appliance Repair Help
Hi I have a 27cu ft Whirlpool GI7FVCXWA00 that is about 7 years old. This is one of those units where the compressor winds up and can sound like the turbo on a semi truck... when operating properly. The freezer is cooling fine. However, the fridge is only cooling to 55 degrees in spite of being set to 37. I also don't observe hearing the compressor winding up like it used to (the compressor noise is something owners frequently complain about on this model so it is an obvious sound that the fridge makes under normal operation). Setting the fridge temp lower does not seem to help much. I ran the diags on the compressor, fans and thermostats and all check out. Based on what I know of how most refirgerators work - that is a fan circulates air from the freezer box to the fridge compartment to achieve the desired temp - I suspect that the passage between freezer and fridge is blocked but don't know where either the damper or the passage are located on this unit. is that the likely cause? If so where are the cooling ducts located? -
New Appliance Service Manual added: Thermador Professional Oven Burner Tech-Bulletin - Oven Temperature Problem
Samurai Appliance Repair Man posted a topic in Appliance Service Manual Requests Forum
Thermador Professional Oven Burner Tech-Bulletin - Oven Temperature Problem View File SUBJECT: Oven Temperature Problem MODELS: Professional Range Models PGxxx and PGRxxx Serial Number FD8301 and Greater PUB 58300000115764 December 2005 Submitter Samurai Appliance Repair Man Submitted 06/21/2016 Category Appliance Repair Manual Pot Luck Supper -
Thermador Professional Oven Burner Tech-Bulletin - Oven Temperature Problem
Samurai Appliance Repair Man posted a file in Appliance Repair Manual Pot Luck Supper
-
Oven Temperature Calibration Procedure All Electric and Gas Ovens Technical Training Bulletin
Samurai Appliance Repair Man posted a file in Appliance Repair Manual Pot Luck Supper
-
- 2
-
.png)
-
- Oven
- calibration
- (and 2 more)
-
New Appliance Service Manual added: Oven Temperature Calibration Procedure All Electric and Gas Ovens Technical Training Bulletin
Samurai Appliance Repair Man posted a topic in Appliance Service Manual Requests Forum
File Name: Oven Temperature Calibration Procedure All Electric and Gas Ovens Technical Training Bulletin File Submitter: Samurai Appliance Repair Man File Submitted: 19 Dec 2013 File Category: Appliance Repair Manual Pot Luck Supper Oven Temperature Calibration Procedure All Electric and Gas Ovens Whirlpool Kitchenaid Jenn-Air Maytag Amana Admiral Roper Ikea PUB W10565140 Click here to download this file -
New Appliance Service Manual added: Oven Temperature Calibration Procedure - All Electric and Gas Ovens
Samurai Appliance Repair Man posted a topic in Appliance Service Manual Requests Forum
File Name: Oven Temperature Calibration Procedure - All Electric and Gas Ovens File Submitter: Samurai Appliance Repair Man File Submitted: 25 Oct 2013 File Category: Appliance Repair Manual Pot Luck Supper Oven Temperature Calibration Procedure - All Electric and Gas Ovens Basic procedure for correctly calibrating oven temperature. SOP for all gas and electric ovens regardless of brand. Whirlpool Technical Training Pointer #: W10565140 Release Date: January, 2013 Click here to download this file -
Oven Temperature Calibration Procedure - All Electric and Gas Ovens
Samurai Appliance Repair Man posted a file in Appliance Repair Manual Pot Luck Supper
-
Reed SD-947 (4) Channel Thermometer Datalogger Operating Manual
RegUS_PatOff posted a file in Appliance Repair Manual Pot Luck Supper
-
File Name: Reed SD-947 (4) Channel Thermometer Datalogger Operating Manual File Submitter: RegUS_PatOff File Submitted: 20 May 2013 File Category: Appliance Repair Manual Pot Luck Supper Reed SD-947 (4) Channel Thermometer Datalogger Click here to download this file
-
Hotpoint RGB Range Oven Temperature Calibration
Samurai Appliance Repair Man posted a gallery image in The Appliantology Gallery
From the album: Ovens, Ranges, Stoves
-
Oven Sensor Temperature Resistance Table
Samurai Appliance Repair Man posted a gallery image in The Appliantology Gallery
From the album: Ovens, Ranges, Stoves
Use this table to test the sensor in your oven. You need at least two and preferably three resistance measurements at different temperatures to determine if a sensor is good or not. Check the sensor resistance at room temperature only is not sufficient to conclusively prove that the sensor is good because it may have a non-linear response at higher temperatures.
