Search the Community

New issues with a ten-year-old Pro Harmony natural gas range. I previously had the main circuit board replaced under warranty, discovered an improperly seated wire connector that was causing a thermocouple fault error, replaced a burner on indicator light, and replaced two burner gas lines. Doing this other work on my own gave me confidence that I can fix any issue with the range, as long as I know what the issue is. I now have two seemingly unrelated issues. First, both Xlo burners are completely dead. No gas, no ignitor spark. All other burners are working. No error code associated with this. Second issue is that the oven shuts off with error code e9 (four blinks of Preheating light followed by three blinks of Heating light), usually after finishing preheating. Oven will come back on if the mode dial is turned off and back on, but it's susceptible to turning back off with the same error. There doesn't seem to be any problem with the cooling fans as the code indicates. I'm trying to decide whether to tear the stove apart and hunt for causes on my own, or call for service. The warranty service we got was not a good experience. The circuit board replacement didn't fix the issue we called about, and the place refused to return because the warranty had expired (there was a one-week stretch between their service and my call back). I'm not that confident in my ability to properly diagnose the causes, and even though I'm in Southern California, we don't have other Bosch-approved service companies that are willing to come to our place. Thoughts? Are there steps I could take to diagnose before tearing the range apart?

My oven will not turn on. There are blue blinking lights that indicate the error code. The left light which says oven blinks twice. Then the right light which says heating blinks once. Does anyone know what error code this is so I can order a part.

I am trying to troubleshoot our thermador RED30v all electric oven. The bake element is not heating, the broil will warm slightly for the pre-heat function but zero heat on the bake. The bake element tests about 30ohms. The Red wire from the back of the controller mark BA on the controller has 240 when in bake and there is 240v at the bake element. It seems there is no return path for the circuit. Can someone help me understand this circuit? With the oven off, I did a continuity test from the element to the controller, the red wire is good but I cannot determine where the other side of the bake element goes. Both wires are red at the element. Is the return path through one of the two relays? I've heard about these relays failing causing this same no Bake element heat symptom. I am mostly looking at the BR,BA,L1,COM and neutral pins. The thick black wire on post L1 seems to be power in, the thick red wire on post BA seems to be power out (energized when bake is on) on has continuity to the back element on one side. I cannot find a wire with continuity to the other side of the back element which is confusing me. Any help on this is much appreciated. Thank you. (

Model CiT 36 XKB / 01 has been giving System Failure error code Ci9 ADB L. There is no guidance in the user manual or from any web search that I can find. The suggested power off seems to work every now and again and not for long. Guessing I need a new circuit board, but looking for the service manual and/or confirmation on which board needs replacing. I am pretty handy and have replaced fridge/furnace/receiver boards in the past. Thanks!

Thermador J-Series Oven Service Manual View File PUB 58300000170660 Models: POD301J, PODC302J, PODM301J, PODMW301J Submitter Son of Samurai Submitted 12/12/2018 Category Appliance Repair Manual Pot Luck Supper  

Thermador SCD272TW Oven Schematic View File PUB 58300000109999 Submitter Son of Samurai Submitted 12/11/2018 Category Appliance Repair Manual Pot Luck Supper  

Thermador T36IB800SP:05 Refrigerator Schematic View File PUB 53510001052128 Submitter Son of Samurai Submitted 11/01/2018 Category Appliance Repair Manual Pot Luck Supper  

Thermador PDR366ZS/06 Range Tech Bulletin, Connection Diagram, and Wiring Diagram View File Tech Bulletin: Fault Code 43 PUB 58300000143247 Connection Diagram PUB 58300000029774 Wiring Diagram PUB 58300000110798 Submitter Samurai Appliance Repair Man Submitted 07/16/2018 Category Appliance Repair Manual Pot Luck Supper  

Thermador CIT36XKB/06 Cooktop Tech Documentation Bundle View File Schematic PUB 54300001004418 Service Program PUB 58300000153569 Service Manual PUB 58300000156270 Installation Instructions PUB 58309000730433 Submitter Son of Samurai Submitted 06/18/2018 Category Appliance Repair Manual Pot Luck Supper  

please help me find the service manual for this WTE86300US/10 dryer by bosch. much appreciated!!!!

Thermador PRG366EH/06 Range Schematic View File PUB 50400000016051 Submitter Son of Samurai Submitted 05/01/2018 Category Appliance Repair Manual Pot Luck Supper  

Thermador PRD364EDHU Range Service Bulletin - Door Hinge Kit View File DOOR HINGE SERVICE KITS 651284, 651467, 651468, 651469, 651470, 740269, 740270 PUB 58300000151073 April , 2012 Submitter Samurai Appliance Repair Man Submitted 03/29/2018 Category Appliance Repair Manual Pot Luck Supper