Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


Search the Community

Showing results for tags 'front load'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • Appliantology Welcome Center
    • Site Orientation
    • Announcements
  • Professional Appliance Technician Forums
    • Appliance Repair Tech Forum
    • Master Samurai Tech Workshops
    • Samurai's Appliance Repair Video Classroom
    • Samurai’s Appliance Puzzles
    • The Dojo
  • Appliance Service Manual Requests
    • Appliance Service Manual Requests Forum
  • Appliance Repair Trade Resources
    • Looking for a Tech
    • Looking for a Job
    • Appliance Repair B2B Resources
  • DIYer Appliance Repair Forums
    • DIY Appliance Repair Help
    • Appliance Haikus

Blogs

  • Samurai Appliance Repair Man's Blog
  • kdog's Blog
  • Mrs. Samurai's Kitchen
  • DurhamAppliance's Blog
  • applianceman97's Blog
  • LI-NY Tech's Blog
  • tpoindexter's Blog
  • Eugene's blog about stores, fixing, life, and more!
  • Appliance Repair Tech Tips
  • Koi Guy's Amazing Compendium of Timeless Appliantological Wisdom

Categories

  • Appliance Repair Manual Stash Access File®
  • Appliance Repair Manual Pot Luck Supper

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

  1. 369 downloads

    PUB MFL67307945
  2. 265 downloads

    Whirlpool Washer WFC7500VW0 Repair Part List - W10112250 Tech Sheet - 46197042905
  3. Version 1.0.0

    1,067 downloads

    PUB W10217131 - Rev B Same as PUB W10168566 and PUB 8183018
  4. Door bellows had a tear so time to replace. I got the part number 134728400 which is the current part number for my machine ATF8000FS1. I got the old one on off, installed the new part, all went smooth except the back part is a little tough to get on, but I did it. Put everything back together and the washer door won't shut. I double checked my work and all was done correctly. The new one looked a little deeper then the one I took off. I checked the part number on the old one and it was stamped 134739800. I looked online and 134728400 (the new part I had) is the replacement for part number 134739800. Is there a trick? Is there a known issue? I checked on various sites and everyone says that the new one has replaced the old one. Any Ideas? Brian 134728400 is the replacement for part number 134739800 which is the part number stamped on the old bellows.
  5. Version PDF

    260 downloads

    Maytag Neptune Frontload Electric Service Manual Pub No. 16009127
  6. Version video MP4

    386 downloads

    LG FL Washer Door Lock dE and dL Error Code Troubleshooting Training video
  7. Version PDF

    904 downloads

    Samsung WF428-448 Washer Service Manual Basic Model : WF337AAW/XAA (FRONTIER2-PROJECT) Model Name : WF448AAW WF448AAP WF448AAE WF438AAR WF428AAL Model Code : WF448AAW/XAC WF448AAP/XAC WF428AAW/XAC WF428AAL/XAC (PURPLE PROJECT) Code No.: DC68-02722B-01_EN
  8. File Name: LG FL Washer Door Lock dE and dL Error Code Troubleshooting File Submitter: Samurai Appliance Repair Man File Submitted: 10 Jul 2013 File Category: Appliance Repair Manual Pot Luck Supper LG FL Washer Door Lock dE and dL Error Code Troubleshooting Training video Click here to download this file
  9. This is a Frigidaire Gallery front load washer. It washed one load, then when the next was washed it was possibly a) heavily loaded & maybe unbalanced, but that happens a lot, and b) a sweater got stuck under a paddle so part of the load wouldn't tumble. It then spun and rattled about noisily, and TBH the tub looks like it might be a little dented, if it even matters (I placed tape at that point in the rotation), maybe where it contacted the outer drum. I did check the springs and shock absorbers and they move pretty easily, but evenly. But my question is, should it make this noise when turned by hand? I've never heard a washer make this sound, and wonder if it is associated to the rattling drum, like a bearing is shot or an axle is wobbly. I appreciate your guidance and assitance.
  10. 325 downloads

    GE HA FL Washer Minimanual PUB 31-30623-1 Models: GFWH2400L0WW GFWH2405L0BB GFWH2405L0MG GFWH2405L0MS GFWH2405L0MV GFWH3400L0WW GFWH3405L0BB GFWH3405L0MG GFWH3405L0MS GFWH3405L0MV GFWS3500L0WW GFWS3505L0BB GFWS3505L0MG GFWS3505L0MS GFWS3505L0MV GFWS3600L0WW GFWS3605L0BB GFWS3605L0MG GFWS3605L0MS GFWS3605L0MV GFWS3500 & GFWN2400 Training Manual PUB TB01-11
  11. 335 downloads

    Electrolux EIFLS55IMB0 Front Load Washer Tech Sheet PUB 137022700
  12. 294 downloads

    GE 24 Inch Front Load Washer Training Presentation Models: WCVH4800K0WW WCVH4815K0MS WCVH4800KWW WCVH4815KMS Samsung No PUB number for this document but the Service Guide is PUB 31-9195 in a separate upload. GWS 11/12/09
  13. Blomberg Front Load Washer Service Manual View File PUB 7169581600 Submitter Samurai Appliance Repair Man Submitted 12/05/2018 Category Appliance Repair Manual Pot Luck Supper  
  14. Version 1.0.0

    148 downloads

    PUB 7169581600
  15. Bosch WAP24200UC Front Load Washer Service Manual View File Front Load Washer service manual for /00 - /05 versions of model WAP24200UC PUB 58300000171944 Submitter Hiroshi Submitted 12/28/2016 Category Appliance Repair Manual Pot Luck Supper  
  16. Hello. We have a LG front loading machine that is moving around during the spin cycle. Bearings and spider appear to be in good shape. Is the next thing to check/replace the shocks? Thanks.
  17. Version 1.0.0

    1,051 downloads

    Models: MHW3100DW0 MHW5400DC0 NFW5800DW0 WFW8740DW0 WFW97HEDBD0 MHW4100DW0 MHW5400DW0 WFL98HEBU0 WFW87HEDC0 WFW97HEDC0 MHW4300DC0 MHW7100DC0 WFW72HEDW0 WFW87HEDW0 WFW97HEDU0 MHW4300DW0 MHW7100DW0 WFW81HEDW0 WFW95HEDC0 WFW97HEDW0 MHW5100DC0 MHW8100DC0 WFW83HEDCB0 WFW95HEDU0 MHW5100DW0 MHW8100DW0 WFW8740DC0 WFW95HEDW0 Possible Concern: One or more of the following error codes (symptoms) may be observed by the consumer:  F3E1 (Water Level System Error)  F8E1 (Long Fill, No Water Detected, Water Level Sensor not Detected)  F8E3 (Overfill, Over Suds Condition)  F9E1 (Long Drain) PUB W10803528 August, 2015
  18. Whirlpool Front Load, Direct Drive Washers Air Trap Assembly Blockage:Obstruction Service Pointer View File Models: MHW3100DW0 MHW5400DC0 NFW5800DW0 WFW8740DW0 WFW97HEDBD0 MHW4100DW0 MHW5400DW0 WFL98HEBU0 WFW87HEDC0 WFW97HEDC0 MHW4300DC0 MHW7100DC0 WFW72HEDW0 WFW87HEDW0 WFW97HEDU0 MHW4300DW0 MHW7100DW0 WFW81HEDW0 WFW95HEDC0 WFW97HEDW0 MHW5100DC0 MHW8100DC0 WFW83HEDCB0 WFW95HEDU0 MHW5100DW0 MHW8100DW0 WFW8740DC0 WFW95HEDW0 Possible Concern: One or more of the following error codes (symptoms) may be observed by the consumer:  F3E1 (Water Level System Error)  F8E1 (Long Fill, No Water Detected, Water Level Sensor not Detected)  F8E3 (Overfill, Over Suds Condition)  F9E1 (Long Drain) PUB W10803528 August, 2015 Submitter Samurai Appliance Repair Man Submitted 01/30/2018 Category Appliance Repair Manual Pot Luck Supper  
  19. 1,062 downloads

    Maytag Washer Neptune F/L Solid Door MAH3000 MAH4000 MAH5500 MAH6500 MAH7500 Service Manual 16010061 MAH7500 tech sheets 16025823
  20. Manufacturer: 79641573210 Type of Appliance: Washer Model Number: 79641573210 Have you validated the model number at an online parts site like Repair Clinic? (yes or no): YES Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): YES Door lock is locked closed, could not get model from machine, looked online and this number matches the photo. Any suggestion how to release the lock or open the door, it is full of water and cloths! and how to get the water out before opening the door! Thanks for your help in advance.
  21. My LG WM2032HW front loading washer was throwing an OE error code and failing to spin. I found quite helpful instructions for the WM2487HWMA. See http://fixitnow.com/wp/2011/02/11/accessing-and-removing-the-drain-pump-in-an-lg-front-load-washer/ However, accessing the drain pump for the LG WM2032HW required a slightly different disassembly process. There are no screws on the back to release the top. The top doesn't slide--it lifts up by wedging up the front from two spring clips on either side. Make sure you secure the top once lifted or it will surely hit you on the head later during the repair. I ordered a drain pump from Sears. I also ordered the door boot/gasket (see below). Once the top is up and the front panel is off (see link on how to remove the gasket and door latch from the front panel) you can access the pump assembly. The drain pump is secured by three screws. These screws cannot be accessed easily from the side. The side panel is welded to the frame. The screws for the drain pump are readily accessible by removing the three screws around the filter cleanout. One of the three will already have been removed by having removed the drain cover. The whole pump assembly then lifts up and can turn enough to access the three screws holding the drain pump to the pump assembly. You will need to remove the red and black electrical connectors from the drain pump. You may find it helpful to remove the rubber intake drain hose from the back of the pump assembly and/or the drain hose from the top of the assembly. Replacing the drain pump did the trick. I had no sand or obstruction in the pump or the pump assembly. It just gave out. My LG is OE free and leak free. Since you must for this repair remove the front door, thus having removed the door spring wire from the boot/gasket, you might check for holes in the boot/gasket. Mine had several holes in it. The washer would at times leak during small loads. You will need to remove the inner spring/wire. The inner spring wire is easier to reinstall on the new boot. You will find it much easier if you also remove the weights, top and bottom from the drum. The outer spring wire connected to the door takes some effort. Position it in the groove as much as you can leaving one side of the spring in its final position. With vice grips pull hard to the right while a third hand (helper) positions the wire in the rest of the groove. Be patient. This takes some effort and trial and error. hanks all for the related posts.
  22. Kenmore 110.49972602 Front Load Washer Tech Sheet View File PUB W10217131 - Rev B Same as PUB W10168566 and PUB 8183018 Submitter Samurai Appliance Repair Man Submitted 05/20/2017 Category Appliance Repair Manual Pot Luck Supper  
  23. Version 2.0

    739 downloads

    Whirlpool Alpha Washer Tech Bundle Care Package Job Aid W10372167 Service Update W10642118 Training Pointer W10598804 Tech Sheet W10441081B Tech Sheet W10254474B Service Pointer W10393859 Service Pointer W10506796A Instruction Sheet W10443846 Service Pointer W10384730 Service Pointer W10453670A Bundled and contributed by Brother Spannerwrench
  24. Version 1.0.0

    144 downloads

    Front Load Washer service manual for /00 - /05 versions of model WAP24200UC PUB 58300000171944
  25. Speed Queen Alliance Commercial Washer Service Manual View File Applies to several model families. Example: SFNBCASP113TW01 PUB 8-16-476EN Rev. August 2016 Submitter Adirondack Bob Submitted 10/17/2016 Category Appliance Repair Manual Pot Luck Supper  
×
×
  • Create New...